Adhesive Chipboard
Adhesive Chipboard
Manmade Board Basic Introduction To Chipboard
Chipboard is made by bonding together wood particles with an adhesive under heat and pressure to form a rigid board with a relatively smooth surface. Chipboard is available in a number of densities; normal, medium and high-density. Normal density is fairly soft and ‘flaky’, highdensity is very solid and hard (often used for worktops and fire doors) – medium density is somewhere in between.Visit the Woodworking Plans Website pages for more woodworking articles.
There are exterior grades of chipboard available but most are only suitable for internal use as all but high-density tend to soak up water like a sponge. Once water logged, chipboard tends to swell and breakdown.
Veneered Chipboard is widely used for selfassembly furniture, work surfaces, wall linings and partitions. High-density chipboard is often used as a basis for the carcasses of kitchen furniture, worktops, and flooring – this is hardwearing, rigid and heavy.
Other grades available are standard, flame-retardant, flooring, and moisture-resistant.
Chipboard is normally available in 2440 x 1220 sheets (or subdivisions), finished veneered sheets are available in smaller sheets so that the four decorated edges do not need to be cut. Thicknesses range from 12 to 25 mm.
Flooring grade chipboard is marked ‘flooring’ and no other should be used. It is normally available in 2440 x 1200 and 610mm sheets and in 18 and 22mm thicknesses with tongued and grooved edges for easy laying and fixing. Before using flooring grade material check it is suitable for your floor joist spacing.Learn more about wood and woodworking articles please go to woodworkingplans.tv website.
About the Author
woodchuck is an up and coming expert on crafts and hobbies. You can download fine woodworking plans and designs on woodworking for home,or you can learn woodworking by going to woodworkingplans.tv
Choosing New Wood Flooring
One of the easiest ways to improve the look and value of your home is to fit oak hardwood flooring throughout.
As well as being beautiful and hard wearing, they are environmentally friendly as well. Wood is a natural resource that is both renewable and recyclable. It is warm and resilient to walk on and healthy too. Usually wood flooring will never require replacement. And can add thousands of pounds to the value of a home.
There are many options to choose from. Not just the design of the floor, but the shade and texture as well.
Fitting a real wood floor need not be daunting. With no previous experience and easily hired equipment, a complete novice can install a solid hardwood floor proficiently and with professional results.
Selecting the species and style of wooden flooring that suits your home is of the utmost importance as you may well have the floor for life. A solid wood floor can be purchased pre-finished which means it is ready to use and walk on as soon as it has been installed.
The finish is usually acrylic or polyurethane lacquer, which is durable and hard wearing. However oil finishes are becoming increasingly popular, as people have come to realize the maintenance is easy and straightforward.
Real wooden floors (usually the solid type) are also available unfinished. This means that after installation and a light sanding, a finish such as oil, wax or lacquer can be applied.
The most straightforward way of installing a solid wood floor is by secret nailing (through the tongue) into a base of plywood, flooring grade chipboard, joists or battens. If you have an existing wooden floor, this should first be over boarded with a 6mm plywood sheet to ensure stability of your new flooring. Fitting solid hardwood flooring onto concrete sub-floors is best avoided despite the recent advantages in wood floor adhesive currently on the market.
The styles of solid wood floors available are:
Strip – This is typically between 57mm and 90mm in width and is available in random lengths. This takes a little more time to fit than a wider width, but is ultimately more stable.
Plank – This normally denotes wider widths 120mm up to 200mm width.| This is a wider width than plank flooring. However, always bear in mind that the wider the width, the more the tendency for the floor to shrink and gap, or expand and buckle.
Parquet Flooring – Parquet floors have a very different look from typical hardwoods. It is constructed from short stathes of hardwood assembled by hand into tiles, which are then mounted, on a backing board. Some of these can be installed in a similar fashion to the plank floors
Engineered Hardwoods- solid hardwood wear layer of between 2mm-6mm which is laminated onto either a softwood or plywood core. The advantage of engineered hardwoods is their ease of installation, and their stability. If you desire a very wide plank type look, an engineered plank floor will ensure far less movement than solid wood. However this may cost a little more than buying solid plank.
Engineered hardwoods although suitable for secret nailing, can also be installed ‘free floating’ over an underlay. Another advantage of engineered hardwoods is that most can be used over underfloor heating.
Wood Finishes
The final finish (as opposed to staining) is what protects the wood from staining, wear and moisture. The different types of finishes are as follows:-
Oil-Finish – The most common surface finish, oil is applied in two or three coats. Oil soaks into the wood providing good protection against wear and staining. This can be left as a mat finish or buffed to give a light sheen. The big advantage is that the finish is inherent in the wood- it wont’ scratch off, and can be easily repaired.
A polyurethane lacquer – A good option for the DIY-er, this finish dries quickly and cleans up easily with soap and water. This provides excellent wear protection for the floor and gives a professional finish. Although in high traffic areas may show scratching or marks.
PU Impregnator and Wax. A polyurethane sealer (impregnator) is applied to the wood, which acts as a waterproof barrier. A wax can then be applied by hand and buffed up to achieve a warm patina.
Wood or Laminate?
With the popularity of laminate flooring growing everyday, many people often ask which they should choose, hardwoods or laminate.
Laminate flooring is typically constructed with an HDF core, sandwiched between a melamine laminate backing, high quality photographic paper with an image of wood, stone or other natural flooring, and a melamine laminate top. While laminate floors are inexpensive and durable, they are also noisier to walk on, cold and not as attractive as the ‘real thing’
There are benefits and drawbacks to both hardwoods and laminate flooring. Hardwood floors can be
scratched, but scratches are pretty easy to repair. If a laminate floor is scratched or dents, it is not very easily repaired. Where a hardwood floor can be sanded to remove imperfections, the same cannot be done Laminate flooring companies do make touch-up and chip repair kits as well as offer plank replacement. With hardwoods, though, a simple light sanding may do the trick.
Cleaning & Maintenance
Caring for a wooden floor usually requires little effort. Always try and dry clean the floor, as this is the safest and most efficient method. If you do have to wet clean your floor, bear in mind that leaving a layer of moisture to dry on your floor will leave it looking dull and will soon make it attract more dirt.
Maintaining sheen is important as this prevents dirt adhering to your floor. Always fit protective pads to the base of furniture and install a good door mat at the entrance and you will find that this will eliminate most of the scratches on your new floor.
About the Author
David is technical manager of Birbek
engineered wood flooring
|
|
Jillibean Soup Blue Corrugated 1.25-inch Alphabet $4.89 Get loads of texture and character with this blue corrugated alphabet from Jillibean Soup. This package contains one 12×12-inch sheet of eighty-seven 1.25-inch acid-free letters. |
|
|
Spooktacular Glitter Chipboard Alphabet Stickers $5.59 This Spooktacular package contains two 4.5 x 12-inch sheet of glitter chipboard alphabet stickers. There are a total of 149 pieces. |
|
|
Rhinestone Chipboard Silver Letter Stickers $6.59 These large self-adhesive chipboard letters with shine with rhinestone gems, and perfect for decorating and personalizing paper crafts. Each letter measures approximately 1.75 inches high. |
|
|
Rhinestone Chipboard Pink Letter Stickers $6.39 These large self-adhesive chipboard letters with shine with rhinestone gems, and perfect for decorating and personalizing paper crafts. Each letter measures approximately 1.75 inches high. |
|
|
Rhinestone Chipboard Black Letter Stickers $7.49 These large self-adhesive chipboard letters with shine with rhinestone gems, and perfect for decorating and personalizing paper crafts. Each letter measures approximately 1.75 inches high. |